All the Brackets

Bracket Number 1:

The return pipe from the radiator to the header tank has always been attached with a zip tie holder, but only double sided taped on. Every time the tape fails the hose is a bit flappy.

To fix this issue long terms I’ve stick a rivet into the bracket that holds the AFM

This is not going anywhere now.

Bracket Number 2:

Brake Servo vacuum hose holder

This attached to one of the bolts holding the rocker cover.

Up to now the hose sat on the rocker cover which has rubbed the paint away. Now there is plenty of clearance.

Runs as it did before, only with a gap to the top of the engine.

Bracket 3

This is more of a closing panel than a bracket. There is a small hole pedal box into the engine bay behind the servo.

Can’t see it from up here with all the body work on, but should stop fumes getting into the cabin here.

Leave a Reply

Your email address will not be published. Required fields are marked *