Bracket + Nose Cone – Marlin Sportster Build Log

&lt;p&gt;Plan A to hold the mesh in place on the nose cone - fibre glassed a set of nuts to on to it, then bolt it on. Final status - Epic Fail. The nuts pulled out.&lt;/p&gt;

&lt;p&gt;Plan B (Richard came up with this one) Tubes fibre glassed into the nose cone!&lt;/p&gt;

&lt;p&gt;Fibreglassed in place&lt;/p&gt;

&lt;p&gt;All tubes installed&lt;/p&gt;

&lt;p&gt;Some paint to clean up the work&lt;/p&gt;

&lt;p&gt;Complete&lt;/p&gt;

&lt;p&gt;Mesh installed with ZIP ties&lt;/p&gt;

&lt;p&gt;Close up of the final mounting&lt;/p&gt;