Mudguard Stay

<p>New bits of steel for mud guard holders</p>

New bits of steel for mud guard holders

<p>Spacing for the carbon wings - ended up using 1/4 of one of these as space.</p>

Spacing for the carbon wings – ended up using 1/4 of one of these as space.

<p>Steel bent and fitted to the front of the carbon wing.</p>

Steel bent and fitted to the front of the carbon wing.

<p>Original wing mounts chopped and mounted onto the car. The standard holes needed drilling out slightly so that brackets would fit.</p>

Original wing mounts chopped and mounted onto the car. The standard holes needed drilling out slightly so that brackets would fit.

<p>Eyeing how much needs cutting off to fit the new steel.</p>

Eyeing how much needs cutting off to fit the new steel.

<p>After much fiddling, a bit of welding and grind and the wing is mounted</p>

After much fiddling, a bit of welding and grind and the wing is mounted

<p>Fits is not bad but the carbon wings are not quite as wide as the originals so it gets very close to the tyre.</p>

Fits is not bad but the carbon wings are not quite as wide as the originals so it gets very close to the tyre.

<p>Just needs paint now and the other side making.</p>

Just needs paint now and the other side making.

Leave a Reply

Your email address will not be published. Required fields are marked *