The adapter that Robin sent me for the brake servo to master cylinder, now with the edge machined down to match the silicon mould I managed to create with my previous “botch job” solution!
Tank out again! For the final time, I hope! Time to mount the heat shield.
Heat shield in place – this will keep the heat of the exhaust away from the tank.
View from the back, hopefully the body will cover the shield so you can’t see it
Time to Fix the old HT lead holder-y-me-jig – I did get a another one of these second hand but it was banana shaped and was positioned closer to the exhaust – perhapse it was from a pre face lift. Anyway I decided to fix this one by making new feet for it.
All the brake parts back in place and the HT holder mounted:
