Decided to use the BMW header tank using Robin’s car as a model!
Click me
AFM bracket part 1 – this fixing is not yet strong enough – the metal flexs too much to hold it safely. We’ll need to add a more solid metal bracket up from the bottom. Other end of the bracket – holds the carbon air box and the bottom of the header tank. The carbon airbox can be moved further forward by shortening the blue silicon hose making more room at the back for an intake pipe.
Click me
This bracket used to hold the diagnostic port in addition to the two sensor plugs – there’s not much room here any more so were going to move the diagnostic connector else where. The bracket has been cut and attached at a different angle to normal.
Click me