Bonnet Side Panels
Tub cutout for rear strut towers - only required because we've made the towers wider than standard to accommodate coil overs. Driver side view - its been a long tedious...
Body adjustments and wiring
The striker pin plate re-enforcement is complete on both sides. Each has a rivnut in place to help secure the front of the tub in place. It helps pull the...
Search
The search button is working again, sorry for the inconvenience!
Wings
Driver side front wing, and I thought this one would be easy! If you want to stick to 7J wheels then you can bolt these one without modification. However at...
Some bodywork
Spent a long time today fiddling with the tub and doors, the driver side seems fine now but the passenger side it still a little off. Had to stop to...
Wiring, and a few small things
Lots of wiring done under the bonnet : Bumpers bolted in - the nut is welded to the top so the bumper can be taken out from the bottom. There...
Bumpers
Bumper holes! Rather than taking the recommend route and blindly drilling holes for the bumpers in the back and then fitting the tub around it we fitted the tub and...
Bonnet panels
Did a lot of prep work on the bonnet side panels today. Did some initial cuts on the metal today to start fitting the panels in. Also spent a lot...