Camshaft inserted
New oil seal and o-ring for camshaft
Rocker shafts and rockers on their way back into the head – the head needs to be propped up so there is room for the valves to open as the last rocker needs the camshaft rotated to slide in. Also make sure the rocker shafts are at the right angle before rotating the camshaft otherwise its not easy to move the into the correct place.
Both rocker shafts in and the clips that hold the rockers in place. The spray bar as also been mounted.
A closer view of the assembled head
Everything now in place on the head, it just needs the rocker cover put in place to shield the inside from dust.