Boot floor – need to see if we can find some under construction photos. This was a lot more work that it looks from the pictures! There is a wooden construct underneath that props up the floor, bit like a jigsaw. This provides a nice solid base for it to sit on. The holes for the seatbelts and fuel pipes are rounded off with a router. The front end is also rounded off. The floor is in two pieces which means it can be taken out with the tub still in place. Its bolted at the front and will be wood screwed to the frame below. There’s also two side piece that will be velcro’d in.
Mirrors and E marked repeaters to pass SVA and rear view with rubber surround, you can’t see that much in the mirror so we’re experimenting with a small convex mirror, dunno if this is SVA passable but it certainly give a much better view of the surroundings!
Also spend a few hours playing with the front camber and toe settings so the car would auto centre when its rolling along. I think it’s there now but need to take it for a drive really.