Step 1 – measure out and drill 40 holes in one floor
Step 2 – drill 40 holes in the the floor of the other side.
Step 3 – drill 40 holes in the driver side
Step 4 – drill 40 holes in the passenger side after a trip to the DIY shop to get a new drill bit! Despite the extensive use of cutting compound the drill bits just get blunt after drilling 120 holes in hard steel!
Step 5 cover driver side with black goo from CBS and put 40 steel rivets in
Step 6 – repeat on the passenger side, then go and rest hands / arms…
And some more wiring, some more wiring added, the dash is now easy to remove if need by unplugging a few multi plugs.
