Wiring
We’ve made excellent progress with the wiring, pretty much everything is in place now ready to go!
Bodywork
Rear lights are in and the tank filler hole is drilled. The wings are not the same, the left one is longer than the right one. Makes for an interesting task lining up the lights. Rear view is nearly done, the real lights still need to go in (rather than the reflectors) the fog lights need to go on. As do the number plate lights!
Also started removing the flash lines from the tub, what a PITA job!
Finally a bit of future tuning news:
This is a crank from a BMW M52B28 engine, with a spacer at the front end this will drop right into the M20 block. Combined with 130mm conrods from a M20B20 and the pistons from the M20B25 this will result in a 2.8 ltr stroker engine. The parts been put in the box ready for rebuilding the engine at some point in the future.