With the screen pulled back the metal of the screen frame pretty much touches the scuttle
Screen should provide a decent amount of wind protection. Side screen may still need to be fitted!
The driver side - the bottom hole just bolts in with a spacer, not sure yet how the top bolts in yet as the brackets have a huge bend in them that don't seem to line up with anthig.
The ali panel under the screen is not the right shape but once the rubber strip is added it almost fills the gaps - some filling work will be need to make it fit better.
All we need now are some wishbones!
Windscreen brackets - the extra bracket that creates the triangle need two nuts worth of spacer, I think a different solution needs to be implemented here!
Plan A to hold the mesh in place on the nose cone - fibre glassed a set of nuts to on to it, then bolt it on. Final status - Epic Fail. The nuts pulled out.
Plan B (Richard came up with this one) Tubes fibre glassed into the nose cone!
A tube!
A recess for the tube
And through the hole a zip tie.
Fibreglassed in place