Filler cap attached
Fog and reverse lights attached – these are just for SVA, the round ones will go on afterwards!
Bonnet clearance – just fits!
Under bonnet scuttle panels cut to shape and bolted in place.
Driver side scuttle cover – single hole for battery cable.
Passenger side panel with the same configuration as the driver side.
Modified Marlin headlight mounts – hole is milled out for the SVC headlights that have a larger diameter mount. The reason for milling rather than drilling was to move the hole back a bit – the damper mounting bolt gets the way otherwise!
Final dash wiring in progress – this is a clean up and tie down of everything.
