Part evolution from initial concept to final co-polyester print, shown at the front the traditional bulb clear lens, LED amber indicator and LED ring light. The final part: Test fit...
Version 2 on the left, much smaller than the inital version: Some clearance to fit two next to each other on the Sporster The part is still more than strong...
Version 2 model, more compact, less print time and should have a good 1-2mm gap to place both lights next to each other. Version 2 Version 1 Version 2 Version...
Test print Version 1 in PLA, some Dremel work needed due to minor measurements being out, mostly it’s Ok!
Test print in PLA, will be able to test fit in a day or two. The final version will be printed in a copolyester for more heat resilience.
When we first build the Sportster 3D printing wasn't a thing for home users. This has changed in the last 13 years, so it seem like a good time to...
