Rear brake pads
I fitted ATE brake pads to the front some time ago, they bite much better than the Jurid ones and generally feel better. The rear was still on Jurid and...
Varex exhaust build part 5
Video (obligatory no exhaust clip right at the end when everthing was off): https://youtu.be/KXJBKerTiNI
Varex exhaust build part 4
As I was busy Richard sorted the wiring out for the control box: Wiring, inside the tub running along the tank with the rest of the rear loom Wiring running...
Varex exhaust build part 3
Built the other side of the exhaust today. Welding is 'better' than when I started but still pretty uneven. I can't weld too far consistently around the curve yet. Did...
Varex exhaust build part 2
Step 14: Cut down the output pipes, otherwise the tips would stick out too far. Step 15: Tip test fit, could move these back further by cutting the tip input...
Varex exhaust build part 1
Progress on building the new exhaust. The welds a'it purdy but they're solid and not tea bag considering I've never used a TIG before and have learned how to use...
Exhaust design v2
A little bit of an optimisation, someday soon I may get around to start building it.
Exhaust tech drawing
Plan for the updated exhaust, straight pipes shown full length and relative spacing is not correct.
Some new exhaust bits
Planning an update to the exhaust, starting early in the morning or coming back late is a bit of an issue. Dispite the sound passing SVA it’s a tad disruptive....