Interior
DVLA Inspection took place today so with any luck we'll have a tax disk and reg number in a about a week! Some final touches to the interior, thanks to...
SVA Pass!
It passed SVA today, thanks again to Mark top bloke! (couldn't get a pic of us with car due to government regulations, never mind!)
Last few tweeks before SVA retest
With the belts repositioned the boot floor needed to be modified so they clear. Smoother out the edges around the holes for the belts. Belt holes all done and cleaned...
Nearly there (and oooopsy!)
Lets get the mundane stuff out the way first: Edge trim now firmly attached to the bonnet and surround Holes in the tub for the belts to clear Edge radius...
More SVA fixes
Bracket made and installed for the brake compensator valve. Its now solidly bolted in place with a P clip. Also add an extra P clip to one of the brake...
Steel Bar
Here's a piccy of us at SVA: A trip to Metal Supermarket in Southampton in the morning to get some steel tube, then a visit from TA member Black-Cat (Tom)...
SVA Fail
It failed. However it's not that bad: 1) Seat back strength. As the seats have harness holes in an impact all of the force gets taken up by the back...
MOT Video
Sorry you'll need Flash installed to view this video!
MOT Pass!
woohoo MOT pass. Did fail on 3 loose bolts first time through not bad! Emissions were: CO 0.97% HC 151ppm yeahy! took video on the way over will process and...