Scuttle side panels
New scuttle side panel without louvres compared to the original with louvres. The new one also now has folded back edges which gives a much better edge. New scuttle side...
Wiper Installation
After spending a lot of time eyeing up the location for the wipers I came to the conclusion that 90 degrees would work best for us. After looking inside the...
Louvre Project
The ITB projects a bit quiet right now as we're trying to get the car ready for paint. Part of the this is a set of louvres. I've probably spent...
ITB’s continue
A bit more progress today in preparation so the manifold can be completed. I couldn't quite run the pipes at the same angle as the holes in the head due...
ITB Idle Control
I've been research idle control on these. The GSXR has a manual fast idle lever on the bar. Some people have experimented with a stepper motor to control this, but...
ITB’s continue
Two sets of ITB's give you 4 bolts to screw them together - not long enough for 6 throttles. The solution is to chop the thread off two of them...
ITB Project
Another project dreamed up during a cold, wet winter not driving: Two sets of these GSXR 600 K3 throttle bodies: An spare M20B25 intake manifold A number of hours with ...
Happy New Year 2009
Welcome to 2009 :o) I swear this year we'll paint the car. Few other projects still on the cards such as exhaust valves, ITB's adapted from a Suzuki GSXR 600,...