Small update

Been trying to bleed the coolant in the engine but nothing has been coming out the hole! So took the thermostat housing cover off. There was a big build up of deposits in there. The engine block itself the other side of the thermostat looked fine. So I’m guessing running mostly on idle with the stat closed has caused it. Anyway the stat is fine, tested it in boiling water.

Cleaned up the housing cover, ran some coolant flush through the system for 10mins, drained it then filled up with 25% antifreeze 75% distilled water.

Also set the speedo, big thanks to Stuart for the guide

Leave a Reply

Your email address will not be published.