As promised here are a some better pictures of the dashboard taken in the light:
And some better pictures of the heater speed control:
And the back of the dashboard – by redoing the sponge part we were able to scretch the vinyl over the back and glue to the dash. This means there will be no bumps or gaps between the scuttle and the dash / trim.
Finally some body work, cutting out the holes on the nose cone , these are quite big but the bigger the holes the more cold air can flow in to cool the engine.:
and on the next page:
Holes are now rounded out and the grille placed behind – grille still needs to be cut down and mounted.
All it needs is the spotlights remounting, grill mouting and the front end will be complete.