BMW M20B25 tuning parts

A collection of images related to engine tuning

• Home
• Next
• Last

Total Images in this section: 23

• 
  Preview Image
  Full Size (0.44Mb)
  Intake water by pass pic 1/3
  
• 
  Preview Image
  Full Size (0.47Mb)
  Intake water by pass pic 2/3
  
• 
  Preview Image
  Full Size (0.37Mb)
  Intake water by pass pic 3/3
  
• 
  Preview Image
  Full Size (0.65Mb)
  BBTB - Big Bore Throttle Body on the left and the standard item on the right. Source from www.e30zone.co.uk
  
• 
  Preview Image
  Full Size (0.67Mb)
  BBTB
• 
  Preview Image
  Full Size (0.56Mb)
  Standard throttle body
  
• 
  Preview Image
  Full Size (0.07Mb)
  BTB 6 Branch manifold. Has been dyno proven to add 18bhp - if its even 1/2 this its all good!
  
• 
  Preview Image
  Full Size (0.09Mb)
  BTB 6 branch manifold for M20 engine
  
• 
  Preview Image
  Full Size (0.14Mb)
  BTB 6 branch components. With X pipe to equalise the pressure in the exhaust system. The rest of the exhaust is still in the planning stages!
  
• 
  Preview Image
  Full Size (0.69Mb)
  Rear coil over conversion using E30 Gaz shocks. The rear towers need widening a little to allow ample room for them to move under heavy sideways load.
  
• 
  Preview Image
  Full Size (0.96Mb)
  BMC CDA (Carbon Dynamic Airbox) Carbon intake system that will shield from engine heat soak and pull its air directly from an opening on the side of the bonnet insuring fresh cold air reaches the engine.
  
• 
  Preview Image
  Full Size (0.69Mb)
  Silkolene Silktran Syn 5 gear box and lsd oil to make sure everything runs smooothly!